Journal cover Journal topic
Journal of Bone and Joint Infection An open-access journal of the European Bone and Joint Infection Society and the MusculoSkeletal Infection Society
Journal topic

Journal metrics

h5-index value: 15
h5-index15
Volume 3, issue 4
J. Bone Joint Infect., 3, 187–196, 2018
https://doi.org/10.7150/jbji.27348
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.
J. Bone Joint Infect., 3, 187–196, 2018
https://doi.org/10.7150/jbji.27348
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.

Original full-length article 07 Sep 2018

Original full-length article | 07 Sep 2018

Antibiotic Elution and Mechanical Strength of PMMA Bone Cement Loaded With Borate Bioactive Glass

Grahmm A. Funk1, Jonathan C. Burkes1, Kimberly A. Cole1, Mohamed N. Rahaman2, and Terence E. McIff1 Grahmm A. Funk et al.
  • 1Department of Orthopedic Surgery, University of Kansas Medical Center, Kansas City, KS, United States
  • 2Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO, United States

Keywords: borate glass, bioactive glass, vancomycin, elution, strength

Abstract. Introduction: Local delivery of antibiotics using bone cement as the delivery vehicle is an established method of managing implant-associated orthopedic infections. Various fillers have been added to cement to increase antibiotic elution, but they often do so at the expense of strength. This study evaluated the effect of adding a borate bioactive glass, previously shown to promote bone formation, on vancomycin elution from PMMA bone cement.

Methods: Five cement composites were made: three loaded with borate bioactive glass along with 0, 1, and 5 grams of vancomycin and two without any glass but with 1 and 5 grams vancomycin to serve as controls. The specimens were soaked in PBS. Eluate of vancomycin was collected every 24 hours and analyzed by HPLC. Orthopedic-relevant mechanical properties of each composite were tested over time.

Results: The addition of borate bioactive glass provided an increase in vancomycin release at Day 1 and an increase in sustained vancomycin release throughout the treatment period. An 87.6% and 21.1% increase in cumulative vancomycin release was seen for both 1g and 5g loading groups, respectively. Compressive strength of all composites remained above the weight-bearing threshold of 70 MPa throughout the duration of the study with the glass-containing composites showing comparable strength to their respective controls.

Conclusion: The incorporation of borate bioactive glass into commercial PMMA bone cement can significantly increase the elution of vancomycin. The mechanical strength of the cement-glass composites remained above 70 MPa even after soaking for 8 weeks, suggesting their suitability for orthopedic weight-bearing applications.

Publications Copernicus
Download
Citation